Infinity
AirFlo
Assembly, Installation and Operating Instructions
SAVE THESE INSTRUCTIONS
NOTE: Check all parts for shipping damage. In case of
damage, DO NOT use. Contact Carrier/Invacare for fur-
ther instructions.
SAFETY SUMMARY
The following recommendations are made for the safe
and proper installation and use of the Infinity AirFlo:
GENERAL WARNINGS
DO NOT install this equipment without first read-
ing and understanding this instruction sheet. If you
are unable to understand the Warnings, Cautions
and Instructions, contact a qualified technician
before attempting to install this equipment - oth-
erwise, injury or damage may occur.
Care should be taken to prevent the hook and
loop fasteners from becoming wet. Prolonged
contact with moisture may reduce the hold of
the hook and loop fasteners.
INSTALLATION WARNINGS
After ANY adjustments, repair or service and BE-
FORE use, make sure that all attaching hardware
is tightened securely.
USER WARNINGS
Skin condition should be checked very frequently
after the installation of any new seat.
Care should be taken to ensure that the Infinity
AirFlo is properly inflated. Over-inflation will not
allow the body to sink deeply enough into the
cushion and proper body weight distribution will
not be achieved. Under-inflation may result in the
user “bottoming out” onto the cushion base.
The Infinity AirFlo should be checked daily to de-
termine whether the inflation level is correct.
IMPORTANT INFORMATION
The best way to avoid problems related to pressure sores
is to understand their causes and your role in a skin man-
agement program.
Your therapist and physician should be consulted if you
have questions regarding individual limitations and needs.
All seating should be selected carefully. Working with your
therapist, and physician is the best way to assure that a
seating choice matches your individual needs.
As the needs of the individual become more complex,
the seating evaluation becomes more important.
INTRODUCTION
Infinity AirFlo
The Infinity AirFlo is designed to provide continuous, flex-
ible support by allowing the body to sink into the air-filled
cells. By doing so, it provides pelvic stability, leg position-
ing and pressure management.
AirFlo Insert
The AirFlo insert is made from a fire resistant, neoprene,
multicelled air bladder. The cells are constructed individu-
ally to move independently of each other. This allows the
body to sink into each cell as needed
Outer/Inner Covers
The top layer of the outer cover is made from a highly
elastic nylon spandex material. The sides are fabricated
with a durable nylon fabric. The bottom is fabricated from
a heavyweight, waterproof, non-skid fabric.
An inner water repellant cover is provided for protection
of the foam. Regular cleaning and inspection of the inner
and outer covers is recommended. Refer to INSPEC-
TION/CLEANING
in this instruction sheet.
ATTACHING/REMOVING SEAT TO/
FROM SEATING SURFACE (FIGURE 1)
NOTE: To remove the seat from a seating surface, re-
verse the following procedures.
NOTE: The seating surface can be one (1) of the follow-
ing: Seat upholstery, drop base or seat pan.
NOTE: The zipper on the seat should always face rearward.
NOTE: There are double sided hook attachment strips
attached to the loop attachment strips on the BOTTOM
of the Infinity AirFlo. Depending on the seating surface
the Infinity AirFlo is to be used on, the double sided hook
fasteners will either be left in place OR removed.
1. Position the accessory bag so that it is hanging in
FRONT of the seat.
NOTE: If the accessory bag is empty, it may be folded under
the seat, and attached with the hook and loop fasteners.
1
