Overbed Table
4 Assembly
4.1 Assembling the IH1010 Overbed Table
1.
Place table top on a flat stable surface top side down.
2.
Insert release lever with rounded side up into the column assembly over pin.
3.
While holding the release lever
A
in place, rotate the column assembly
B
and insert into table top bracket
C
.
4.
Align holes on the column assembly (including release lever) with those of table top bracket and secure the column assembly with hardware
D
provided.
5.
Secure base
E
to the column assembly with bolt plate and hardware
F
provided.
6.
Install the four casters
G
. Set table upright.
7.
Remove the black screw
H
located under caution label on column and replace with zinc-plated screw provided.
8.
Assembly is complete.
4
1192682-A~01
Summary of Contents for IH1010
Page 7: ...Notes...
