42
7.9 Seating
WARNING
•
After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is
tightened securely - otherwise injury or damage may result.
•
It is important for regular inspection to be carried out on the armrests for signs of visible damage. If any
repairs are required, these should be carried out by an INVACARE dealer.
7.10
Installing / Removing Seat / Back Cushion (where fitted)
CAUTION:
This adjustment should only be made when the chair is unoccupied and the joystick unit switched off.
NOTE:
The cushion inner may be removed from the upholstered cover by sliding it out from cover flap on the
underside of the cushion.
1.
Ensure the hook and loop fastener strip on the seat/back is visible (remove covering strip if necessary).
2.
Position the cushion on the seat in the desired location and push down to secure.
3.
To remove, pull up on cushion to release the hook and loop fastening. Remove cushion from seat.
