Invacare® Fox™
CAUTION!
Risk of injury or damage to the mobility device
or to the transporting vehicle, if the legrests are
in a raised position while the mobility device is
used as a vehicle seat.
– Always completely lower height-adjustable
legrests, if fitted.
In order to use a mobility device as a motor vehicle
seat, it needs to be fitted with tie-down points
to enable anchoring in the motor vehicle. These
accessories may be included in the standard scope of
mobility device order and delivery in some countries
(UK for example), but may also be obtained from
Invacare as an option in other countries.
This mobility device complies with the requirements of ISO
7176-19 and may be used as a vehicle seat in connection
with an anchoring system that has been checked and
approved in accordance with ISO 10542. The transporting
vehicle must be professionally converted to anchor the
mobility device. Contact your vehicle’s manufacturer for
more information.
The mobility device has undergone a crash test in which
it was anchored in the transporting vehicle's direction of
travel. Other configurations were not tested. The crash test
dummy was secured using pelvic and upper body safety
belts. Both types of safety belt should be used in order to
minimize the risk of injuries to head or upper body.
Invacare tests with a 4–point tie-down system
from Unwin Safety Systems.
– Contact Unwin for more information on how
to obtain such a system for your country and
vehicle type. For information concerning the
curb weight, refer to
It is imperative that the mobility device is inspected by
an authorized dealer before being used again after being
involved in a crash. Alterations to the mobility device
anchoring points may not be carried out without the
manufacturer's permission.
8.3.1 How the mobility device is anchored in a vehicle
for use as a vehicle seat
The mobility device is fitted with four
tie-down points. Snap hooks or belt loops
can be used for fixation. If the wheelchair
can be used as a vehicle seat, these tie-down
points are labelled with the symbol shown
on the right.
Fig. 8-1 Front
Fig. 8-2 Rear
70
1577074-F
Summary of Contents for Fox
Page 91: ...Notes ...
