Invacare® Formula™ CG Seating
5.
Secure lower footrest assembly with existing mounting screw
and coved spacer. Securely tighten.
Make sure spacers are positioned properly when
reassembling to prevent damage to the frame mounting
tubes.
6.
Reinstall the footrest(s) onto the wheelchair. Refer to Footrest
Height Adjustment.
7.
Reinstall any accessory onto the footrest(s).
7.18
Adjusting Adjustable Angle Flip-Up
Footplates
Angle Adjustment
Perpendicular and/or
Inversion/Eversion
Adjustment
Depth Adjustment
7.18.1
Depth Adjustment
Observe the angle of the footplate for reinstallation.
The settings for positioning the footplates on the half-clamps
may vary for each footplate.
1.
Remove the two flat screws
A
, washers
B
and locknuts
C
that
secure footplate
D
to the half clamp
E
.
2.
Move footplate to one of four mounting positions.
If desired depth is still not obtained, rotate the half
clamp 180° on the footplate hinge
F
.
3.
Retighten the two flat screws, washers and locknuts.
62
1143155-R-01
Summary of Contents for Formula CG Elevate
Page 95: ...Notes...
