8 RIDING POSITION
Part No 1171790
51
Invacare®
Top End® Force™Handcycle Series
8.3
Adjusting Hand Crank
Diagonal Adjustment
1.
Loosen, but do not remove the hex nuts that secure the crank handles to the fork.
2.
Slide the crank handles up and/or down until the proper tension on the chain is achieved.
3.
Tighten the clamp that secures the crank handles to the fork securely.
Vertical Adjustment
1.
Loosen, but do not remove the hex nuts securing the hand crank to the fork stem.
2.
Move the hand crank assembly up or down in the fork neck until you are comfortable with the position for operational purposes.
3.
Tighten the hex nut to secure the hand crank in the desired position.
4.
Tighten the chain if necessary.
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or
damage may occur.
The proper chain tension will be approximately 1/2-inch of chain slack.
If crank is in desired position but chain tension is not correct, links MUST be added to or removed from the chain to correct the tension.
This should be performed by a qualified technician.
Vertical and Diagonal Adjustment
Diagonal Adjustment Only