SECTION 4—SEAT/BACK
1 4
S E C T I O N 4 — S E A T / B A C K
W A R N I N G
The seat height, seat depth, back angle, seating system, size/position of the rear
wheels, size/position of the front castors, seating options (e.g. headrest, back bag,
…) as well as the user condition directly relate to the stability of the wheelchair. Any
change to one or any combination of the nine may cause the wheelchair to decrease
in stability. Refer to table in paragraph Stability Warning, page 6.
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may occur.
Removing Back-canes
NOTE: For this procedure, refer to FIGURE 4.1.
1. Remove the mounting screw and locknut (M6) that secures the back cane to the
back-cane bracket.
2. Repeat STEP 1 for the other back cane.
3. Remove the back canes out of the back-cane brackets.
FIGURE 4.1
Removing Back-canes
Removing/Installing Seat Upholstery
NOTE: For this procedure, refer to FIGURE 4.2, next page.
R e m o v in g S e a t U ph o l s t e r y
NOTE: To install the seat upholstery, reverse this procedure.