40
7.6
Controlling the wheelchair using the remote
•
Switch on the remote (ON/OFF button). The displays on the remote will illuminate. The
wheelchair is ready to drive.
•
Set the drive level (“drive level“ button see
"Layout of the remote"
on page
34).
•
Speed stage 1 (slow) to 5 (fast) is shown on the drive level display.
Can the electronic system programming be adapted?
The electronic controller is programmed with standard values during manufacture. Your
Invacare® dealer can carry out programming tailored to fit your requirements.
Will the wheelchair not drive after switching on?
Check the drive-away lock (see chapter
"Activating / deactivating the immobilizer "
on page
38
) and the status bar indicator (see chapter
"ON/OFF diode (status display)"
on page
37
.).
