Invacare
®
Electra
Service Manual
Page 36
As at:15.04.02
12.2.2 Connecting the programming device
•
Switch off the Scooter.
•
Remove the chassis panelling (see chapter 9.3 page: 19).
•
Remove the cover cap (1) next to the remote plug on the controller.
•
Plug the hand programming device connector plug into the socket.
•
Switch on the Scooter.
•
To program the Scooter, see the programming device operating manual.
Remove the cover cap
Note
:
The connector plug also attached to the programming device for the charging socket cannot
be used for programming the Scooter.
Removing the programming device
•
Switch off the Scooter.
•
Remove the hand programming device connector plug from the socket.
•
Replace the cover cap.
•
Complete the Scooter.
