background image

Part No 1171724

11

Invacare® Matrx® PB Elite

5.2

Inspection

Visually inspect parts including hardware, brackets, upholstery materials, foams (if accessible), and 

plastics, for deformation, corrosion, breakage, wear or compression.

6 After Use

6.1

Reuse

7 Warranty

PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO 

PRODUCTS MANUFACTURED AFTER JULY 4, 1975.

This warranty is extended only to the original purchaser/user of our products.

This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state.

Invacare/Motion Concepts warrants this product to be free from defects in materials and workmanship for two years of use by 

original purchaser. This warranty does not apply to punctures, tears or burns, nor to the removable cushion cover. If within such 

warranty period any such product shall be proven to be defective, such product shall be repaired or replaced, at 

Invacare's/Motion Concepts’ option, with refurbished or new parts. This warranty does not include any labor or shipping charges 

incurred in replacement part installation or repair of any such product. Product repairs shall not extend this warranty - coverage 

for repaired product shall end when this limited warranty terminates. Invacare's/Motion Concepts’ sole obligation and your 

exclusive remedy under this warranty shall be limited to such repair and/or replacement.

For warranty service, please contact the dealer from whom you purchased your Invacare/Motion Concepts product. In the event 

you do not receive satisfactory warranty service, please write directly to Invacare/Motion Concepts at the address on the back 

cover. Provide dealer's name, address, model number, the date of purchase, indicate nature of the defect and, if the product is 

serialized, indicate the serial number.

Invacare Corporation/Motion Concepts will issue a return authorization. The defective unit or parts must be returned for 

warranty inspection using the serial number, when applicable, as identification within thirty (30) days of return authorization date. 

DO NOT return products to our factory without our prior consent. C.O.D. shipments will be refused; please prepay shipping 

charges.

LIMITATIONS AND EXCLUSIONS: THE WARRANTY SHALL NOT APPLY TO PROBLEMS ARISING FROM NORMAL 

WEAR OR FAILURE TO ADHERE TO THE ENCLOSED INSTRUCTIONS. IN ADDITION, THE FOREGOING 

WARRANTY SHALL NOT APPLY TO SERIAL NUMBERED PRODUCTS IF THE SERIAL NUMBER HAS BEEN REMOVED 

OR DEFACED; PRODUCTS SUBJECTED TO NEGLIGENCE, ACCIDENT, IMPROPER OPERATION, MAINTENANCE OR 

STORAGE; OR PRODUCTS MODIFIED WITHOUT INVACARE'S/MOTION CONCEPTS’ EXPRESS WRITTEN CONSENT 

INCLUDING, BUT NOT LIMITED TO: MODIFICATION THROUGH THE USE OF UNAUTHORIZED PARTS OR 

ATTACHMENTS: PRODUCTS DAMAGED BY REASON OF REPAIRS MADE TO ANY COMPONENT WITHOUT THE 

SPECIFIC CONSENT OF INVACARE/MOTION CONCEPTS; PRODUCTS DAMAGED BY CIRCUMSTANCES BEYOND 

INVACARE'S/MOTION CONCEPTS’ CONTROL; PRODUCTS REPAIRED BY ANYONE OTHER THAN AN 

INVACARE/MOTION CONCEPTS DEALER, SUCH EVALUATION SHALL BE SOLELY DETERMINED BY 

INVACARE/MOTION CONCEPTS.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, IF ANY, 

INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

IT SHALL NOT EXTEND BEYOND THE DURATION OF THE EXPRESSED WARRANTY PROVIDED HEREIN AND THE 

REMEDY FOR VIOLATIONS OF ANY IMPLIED WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE 

DEFECTIVE PRODUCT PURSUANT TO THE TERMS CONTAINED HEREIN. INVACARE/MOTION CONCEPTS SHALL 

NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. 

THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE/PROVINCIAL LAWS AND REQUIREMENTS.

WARNING

Check ALL fasteners weekly to ensure that mechanical connections and attaching hardware are 

tightened securely - otherwise injury or damage may occur.
DO NOT continue to use this product if problems are discovered. Corrective maintenance can 

be performed at or arranged through your equipment supplier.

WARNING: Risk of Injury

Always have a dealer inspect the product for damage before transferring the product to a different 

user. If any damage is found, DO NOT use the product. Otherwise injury may occur.

Summary of Contents for EDB













Reviews: