Invacare® Modulite
1.
Switch off power wheelchair.
2.
Unplug actuator from actuator module.
3.
Remove screws and nuts at top
A
and bottom
B
of
actuator.
4.
Replace actuator with new one.
5.
Re-insert screws and nuts and tighten.
Replacing footboard actuator
Tools:
•
8 mm Allen key
•
16 mm wrench
1.
Switch off power wheelchair.
2.
Unplug actuator from actuator module.
3.
Remove screws and nuts at top
A
and bottom
B
of
actuator.
4.
Replace actuator with new one.
5.
Re-insert screws and nuts and tighten.
Replacing heel strap
Tools:
•
6 mm Allen key
•
8 mm Allen key
•
13 mm wrench
•
16 mm wrench
1.
Loosen and remove screws
A
and nuts
B
.
2.
Loosen and remove screw and washer
C
and nut and
washers
D
.
3.
Remove heel strap and replace by new one.
4.
Re-insert and tighten screws and nuts.
Replacing felt pads
1.
Replace worn felt pads
A
on bottom of footboard to
avoid damage to the floor.
Replacing footboard
•
8 mm Allen key
1.
Fig. 5-19
Loosen screws
A
on footboard
B
.
2.
Remove footboard
B
from pivot interface
C
.
3.
Insert and tighten screws
A
.
5.10.5 Replacing footboard
•
5 mm Allen key
1.
Loosen screw
A
on hanger, left and right side.
2.
Pull out footboard
B
and replace.
3.
Install parts in reverse order.
For adjusting footboard, see user manual of
mobility device.
5.10.6 Replacing the calf plate on the
center-mounted legrest (powered and
manual)
•
1/64 inch Allen key
Fig. 5-20
A manual legrest can be seen in the illustration. The
method of fixation to the seat is almost identical for both
legrests.
32
1604311-G
