Invacare® AVIVA™ RX series
Removing Batteries
1.
Make batteries accessible. See
.
2.
Remove remaining terminal cap
A
and terminal screw
B
together with washer
C
and cable lug of cable harness
from terminal of rear battery.
3.
Remove rear battery using battery strap.
4.
Pull out front battery carefully using battery strap.
5.
Remove remaining terminal cap and terminal screw
together with washer and cable lug of cable harness
from terminal of front battery.
6.
Remove front battery.
7.
If necessary, replace inlays.
Fig. 6-52 Positive terminal serves as an example.
Installing Batteries
A
52 Ah/60 Ah battery
B
73.5 Ah battery
1.
Install batteries in reverse order.
2.
Make sure that battery box sockets/plugs have been
correctly refitted. Polarity diagram is located on fixation
plate.
3.
Install fixation plate to corresponding mounting holes
A
or
B
.
4.
Install remaining parts in reverse order.
5.
Test all functions.
Fig. 6-53
6.12.5 Replacing Circuit Breaker
If the circuit breaker is damaged, you must replace it together with the battery cables.
Removing Circuit Breaker
•
4 mm Allen key
•
11 mm wrench (60 Ah/73.5 Ah battery)
•
Phillips screwdriver, size 2 (52 Ah battery)
•
Flat screwdriver
60
1654647-B
