7.9.2
Removing
1.
Push the legrest release handle
F
toward the inside of the
wheelchair (facing the front of the wheelchair) and swing the
legrest to the outside of the wheelchair.
2.
Lift up on the legrest
A
and remove from the wheelchair.
3.
Repeat STEPS 1- 2 for opposite side of wheelchair.
7.10
Replacing Heel Loops
1.
Note the position of hex bolt
A
, coved washers
B
and locknut
C
for reinstallation.
2.
Remove the hex bolt, coved washers and locknut that secure the
lower footrest
D
to the footrest support
E
.
3.
Remove the lower footrest.
4.
Remove the phillips bolt
F
, spacer
G
and locknut
H
that secure
the existing heel loop
I
to the lower footrest.
5.
Slide the existing heel loop off the lower footrest.
6.
Replace heel loop.
7.
Reverse STEPS 1-6 to reassemble.
When securing heel loop to lower footrest, tighten the
phillips screw and locknut until the spacer is secure.
7.11
Removing/Installing the Manual Center
Mount Footrest
7.11.1
Installing
1.
Engage the release lever with one hand, hold the center mount
footrest
B
with the other, and insert the center mount footrest
into the mounting bracket
C
of the seat frame
D
.
2.
Reinstall the rigging pivot pin
A
to secure the center mount
footrest to the mounting bracket of the seat frame.
1143192-L-03
37
