Adjustable ASBA Seats
7.35
Adjusting the Seat Frame Mounting
Position
Removing/Installing the
Seat Pan
Adjusting the Seat Frame
Mounting Position
1.
Remove the seat cushion (not shown).
2.
Remove the two socket screws
A
securing the seat pan
B
to
the seat frame
C
.
3.
Remove the eight socket screws
D
, ground washers
E
and
four plates
F
securing the seat frame
G
to the seat-to-floor
bracket
H
.
4.
Perform one of the following to ensure the seating system is in
the proper mounting position:
Some front rigging and seat depth combinations may not
allow for the 1-inch gap. In this situation, position the
seat frame as far back as possible.
•
Wheelchairs with Swing Away Front Rigging - Position
the seat frame as far as possible towards the rear of the
wheelchair. Leave 1 to 1½-inch of clearance between the
front riggings and the front casters in all caster positions).
•
Wheelchairs with Manual Center Mount Front Rigging -
Position the seat frame as far as possible towards the rear
of the wheelchair. Leave 1 to 1½-inch of clearance between
the center mount front riggings and the front shroud.
5.
Secure the seat frame mounting brackets to the seat-to-floor
brackets with the eight socket screws, ground washers and four
plates. Torque to 13 ft-lbs ± 20%.
6.
Position the seat pan onto the seat frame.
7.
Secure the seat pan to the seat frame using the two socket
screws.
8.
Install the seat cushion (not shown).
56
1143192-L-03
