•
Width-adjustable foot plates (2):
1.
Loosen the two fixing screws
I
with 5 mm Allen
key.
2.
Adjust the width position and firmly tighten the two
fixing screws
I
(3–5 Nm) in the desired position.
Invacare recommends that foot plate adjustment is carried
out by a qualified technician.
To ensure a good position of the feet, two types of
straps can be provided; the heel strap
J
(serial)
and the calf strap (optional) attached to the leg rest
support. Both adjustable by hook and loop fasteners.
3.9 Anti-tipper
An anti-tipper prevents the wheelchair from tipping
backwards.
WARNING!
Risk of overturning
Anti-tippers that are incorrectly set or no longer
working can lead to overturning.
– Always check that the anti-tipper is working
before using the wheelchair and have it set
or readjusted by a qualified technician when
required.
– In some configurations, the static stability of
the wheelchair may be lower than 10°; Invacare
strongly recommends the use of anti-tipper
(available as an option).
WARNING!
Risk of overturning
On uneven or soft ground, the anti-tipper can sink
into potholes or directly into the ground, thereby
curtailing or eliminating its safety function.
– Only use the anti-tipper when travelling on
even and firm ground.
IMPORTANT!
Risk of damage
– Never step on the anti-tipper or use it as a
tipping aid.
1608467-E
29
