Invacare® Action 3 NG
Front fitting
1.
Push the armrest down and until the front release
button
B
snaps into its armrest socket hole.
2.
Ensure button protrudes fully through socket hole.
Rear removing
1.
Remove armrest from armrest bracket
D
by pulling
straight up on the armrest.
Rear fitting
1.
Position armrest support
C
over rear armrest bracket
D
.
2.
Push the armrest down until a clear “click” is heard
when it’s locked into the armrest bracket
D
.
Adjusting the height
1.
After loosening the fixing screw
E
with 5 mm Allen key
or alternatively the thumbscrew, if present.
2.
Adjust the height and tighten the fixing screw
E
(5
Nm) or firmly tighten the thumbscrew, into the desired
position.
3.
Perform the setting on both sides.
3.8 Leg rests
WARNING!
Risk of injury
– Never lift the wheelchair by the footrest
supports or leg rests.
CAUTION!
Risk of pinching or crushing fingers
There are swing mechanisms where you could
trap your fingers.
– Be careful when using, swinging, disassembling
or adjusting these mechanisms.
IMPORTANT!
Risk of damage to the leg rest mechanism
– Do not place anything heavy, or let children
sit on the leg rest.
3.8.1 Swing away leg rests
Swinging outwards
1.
Activate the release lever
A
and swing the leg rests
to the outside.
26
1608467-E
