•
One piece footboard
Height adjustment:
1.
Loosening the fixing bolt
B
with 5 mm Allen Key
and 10 mm spanner.
2.
Adjust into one of preset positions and tighten the
fixing bolt (5 Nm)
B
into the desired position.
Angle adjustment:
1.
After loosening the fixing screw
D
with 5 mm
Allen key.
2.
Adjust the angle positions and firmly tighten the
fixing screw
D
(12 Nm) into the desired position.
Invacare recommends that foot plate adjustment is carried
out by a qualified technician.
To ensure a good position of the feet, two types
of straps can be provided; the heel strap (serial)
and the calf strap (optional) attached to the leg rest
support. Both adjustable by hook and loop fasteners.
3.9 Anti-tipper
An anti-tipper prevents the wheelchair from tipping
backwards.
WARNING!
Risk of overturning
Anti-tippers that are incorrectly set or no longer
working can lead to overturning.
– Always check that the anti-tipper is working
before using the wheelchair and have it set
or readjusted by a qualified technician when
required.
– In some configurations, the static stability of
the wheelchair may be lower than 10°; Invacare
strongly recommends the use of anti-tipper
(available as an option).
WARNING!
Risk of overturning
On uneven or soft ground, the anti-tipper can sink
into potholes or directly into the ground, thereby
curtailing or eliminating its safety function.
– Only use the anti-tipper when travelling on
even and firm ground.
IMPORTANT!
Risk of damage
– Never step on the anti-tipper or use it as a
tipping aid.
1608517-C
23
Summary of Contents for Action 3 Junior
Page 62: ...Notes...
Page 63: ...Notes...
