3.5.6 Backbrace for the backrest
The backbrace links the two push handles, provides tension
to the backrest upholstery and must always be in position
on recliner versions.
CAUTION!
– Do not use the backbrace to push the
wheelchair. The backbrace is not a push bar !
– Do not attempt to lift the wheelchair using the
backbrace ; it may come loose and it could
break.
– Keep your fingers away from movable parts
and sharp edges to prevent injuries.
Folding the backbrace
1.
Slightly loosen the two hand screws
A
, pull up the
backbrace
B
and swivel it downwards along the
backrest.
2.
Fold the backbrace
B
until it is in vertical position.
Unfolding the backbrace
1.
Fold the backbrace
B
upwards.
2.
Align the backbrace
B
with the push handle and push it
down on the hand screw
A
.
3.
Firmly tighten the hand screw
A
and makes sure that
the TWO hand screws
A
are properly tighten .
It is important to ensure that the backbrace is
correctly fitted and engaged at all times when the
chair is in use. It should not be left hanging loose
(see label
C
on the backbrace).
1608517-C
17
Summary of Contents for Action 3 Junior
Page 62: ...Notes...
Page 63: ...Notes...
