Invacare® Actio/2™
3.
B
Assemble the push handles
B
.
E
C
D
4.
Assemble the lever
C
, the washer
D
and the bolt
E
with the locking lever on the outer side of the tube.
Ensure that the bolt fits correctly into the square
shaped hole on the attachment.
5.
WARNING!
Risk of falling
– The handlebars must not be angled
outwards as this reduces the lateral stability
of the rollator.
6.
Tighten the locking lever.
The locking levers must be pointing downwards
during use.
7.
Repeat the procedure on the opposite side.
4.3 Unfolding and folding the rollator
Unfolding the rollator
WARNING!
Risk of falling
– Make sure that the folding mechanism is in a
locked position before using the rollator.
A
1.
Unfold the rollator.
2.
Push the folding mechanism
A
downwards.
Folding the rollator
A
1.
Pull the folding mechanism
A
upwards.
2.
Fold the rollator.
WARNING!
Risk of pinching
– Be aware of the pinching risk when folding
the rollator.
4.4 Adjusting the handle height/angle
The handles should usually be positioned at wrist
height. Therapist may suggest different heights
depending on specific needs of the client.
A
B
1.
Stand behind the rollator with flat shoulders.
2.
Loosen the lever
A
.
3.
Adjust the handle
B
to suitable height.
WARNING!
User may fall
– Make sure that the push handles are not
adjusted more than maximum. See the
marking on the push handle tube.
4
1514380-G
