Using the Caster Locks
NOTE: For this procedure, refer to FIGURE 2.
Locking
1. Lift the lock handle up and rotate towards the outside of the wheelchair and release.
2. Ensure that the lock handle stem engages inside the quadrant notch when locking.
3. Ensure that the caster does not swivel when locked.
4. Repeat STEPS 1-3 for the other caster lock.
Unlocking
1. Lift the lock handle up and rotate towards the rear of the wheelchair and release.
2. Ensure that the lock handle stem engages inside the quadrant notch when unlocking.
3. Ensure that the caster swivels when unlocked.
4. Repeat STEPS 1-3 for the other caster lock.
FIGURE 2
Using the Caster Locks
Lock Handle in
Unlocked Position
Quadrant
Notch
Lock Handle
Stem
Locked
Position
Unlocked
Position
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio USA
44036-2125
800-333-6900
Canada
570 Matheson Blvd E Unit 8
Mississauga Ontario
L4Z 4G4 Canada
800-668-5324
Invacare, Yes, you can. and The Medallion
Design are registered trademarks of
Invacare Corporation.
ProSPIN and X4 are trademarks of
Invacare Corporation.
©2006 Invacare Corporation
Part No 1134875
Rev A - 03/15/06