84-Inch Bed Extension
2
Part No. 53000M701
3. Attach the six (6) open-end hooks to the existing link fabric at the foot spring of the
bed assembly.
NOTE: Make sure the open end of the hooks are positioned down towards the ground/floor.
4. Attach one (1) helical spring to one (1)
end of the link fabric extension sup-
plied with the kit. Refer to
FIGURE 3
.
5. Attach the opposite end of the helical
spring to one (1) of the four (4) mounting
holes in the four-inch extension.
6. Secure the open-end hooks to the link
fabric extension.
Head Spring
Fabric
Link
Fabric
FIGURE 2 - ASSEMBLING FOOT SPRING TO HEAD SPRING
Link
Foot Spring
FIGURE 1 - ATTACHING
FOUR-INCH EXTENSION TO
FOOT SPRING CENTER ANGLE
4. Raise head end of bed and disengage the open end hooks that secure the head and
foot springs together.
5. Remove head end and foot boards.
6. Lay bed on side and rotate head and foot
spring sections to a 90° angle.
NOTE: This will allow you to disengage head
spring from foot spring.
INSTALLATION
1. Attach four-inch extension (
Items 1
and 2
) to the right and left hand sides
of the foot spring center angle using
5/16-18 x 1-inch Bolt (
Item 8
) and
Bi-way Locknut (
Item 7
). Refer to
FIGURE 1
. Securely tighten.
2. Reassemble foot spring to head spring. Refer to
FIGURE 2
.
FIGURE 3 - ATTACHING
OPEN-END HOOKS
Link Fabric
Extension
Helical Spring
