© INUX3D 2022
V1.1
Place the right side of the
YP cage over the top of
the YoloBox Pro and the 2
aluminium bars
Drop in two of the supplied
M5x10mm bolts, into the holes
to affix the right side of the YP
cage onto the aluminium bars
These only need to be lightly
tightened. You will damage the
plastic sides if you tighten with
force
Place your hand underneath
the left side which is currently
at the bottom
Flip the entire YP cage over while
pressing the sides together so
the left side is now on top
Drop in 2 more M5x10mm
bolts into the holes and
lightly
tighten
Position the YP cage as shown
and note the 2x M5 slide in nuts
you dropped in earlier
We will be attaching the top
handle to these two T-nuts
PK1 PRO STREAMER YP
Assembly Instructions Page 3 of 5
