Open-Q™ 820 (APQ8096) / 820Pro (APQ8096SG) µSOM Development Kit User Guide Version 1.4
39
Copyright Intrinsyc Technologies Corporation
3.8.17.1 LCD display panel
The LCD panel comes preinstalled on the Intrinsyc Open-Q 820 / 820Pro display adaptor
board. Below are the Panel specifications:
•
Resolution:
480x854
•
LCD Type:
IPS
•
PCAP touch panel with cover glass
•
No of Lanes:
1 x 2 lane MIPI DSI interface via Display Board.
•
Diagonal Length
: 4.5”
•
Note:
The display above when mounted on the Intrinsyc Open-Q 820 Display Adapter is meant to work
with the carrier board. Altering the use of this LCD panel is not recommended.
3.8.18 PCI Express 1X Slot J30
The PCI Express slot J30 used on the Open-Q 820 / 820Pro µSOM development kit is a
standard PC style half card slot. It allows for external peripheral connectivity such as
Gigabit Ethernet, Gigabit Wi-Fi, PCIe based audio / video processors etc. Since there is no
native Ethernet connectivity on the Open-Q platform, an off-the shelf PCIe based Ethernet
card can be used here. Please check the software compatibility before connecting the PCIe
Ethernet card. In addition to being able to establish external connectivity, the connector
provides access to the PCIE2 interface which is being routed out from the µSOM.
Figure 21 J30 PCIe Connector
•
PCI slot power specification
o
Supports half card only
o
Supports 10W card via PSU
o
Supports 25W card via ATX PSU
