8
1-800-221-2099 • HearingHelp.com
Care and Cleaning
It's important to clean your Ranger hearing aid regularly. Without regular
cleaning, wax and moisture can build up and prevent the hearing aid
from working properly. It’s best to clean your Ranger-7600 in the morning
before you use it.
How to clean your Ranger-7600:
1. Wipe off the outside of the Ranger hearing aid and the
eartip with a soft cloth. Eartips can be replaced when
necessary.
2. If wax or debris remains, use a
small soft cleaning brush to gently
remove it
.
Cleaning Brush
IMPORTANT CARE INSTRUCTIONS
BEGINNING THE DAY: After
showering, apply all lotions,
creams, hairspray, perfume
and cologne BEFORE putting
on your Ranger-7600s. Water
and such sprays can damage hearing aids. And please remember, your hearing
aids are sensitive and don’t like extreme heat or cold. Never place your
Ranger-7600 in water. If it becomes wet, immediately remove the battery and let
your Ranger-7600 stand in a dry place or DryAid dehumidifier for several hours.
NEVER use heat (blowdryer, oven, microwave, etc.) to dry your Ranger.
AT THE END OF THE DAY: Open the battery door when not wearing your
hearing aid. Any moisture inside your hearing aid can then evaporate,
extending the life of your Ranger-7600. With the battery door open, you can
be assured your hearing aid is off and not squealing. A squealing hearing
aid can attract pets which have been known to chew on hearing aids and
damage them beyond repair. Even better, remove the battery and store your
Ranger-7600 overnight in a DryAid dehumidifier.
