EN-V233 – 5017 – AB Installation and Use of the Intratone Mini HF GPRS module
Page 6 / 6
PROGRAMMING THE EQUIPMENT AT
INTRATONE.COM
The Mini HF GPRS module is programmable from the website
www.intratone.com
in the
“management website” tab.
The remote controls or “Mobile Keys” are also managed, exclusively, via the website.
To register your equipment you will need the contract number corresponding to it.
Then simply select Intrabox Data and complete the set-up stages.
TROUBLESHOOTING
Diagnosis
Check
What to do
No reception LED on the
module
Is it switched on?
- Switch the GPRS module on
and off.
If yes, indicates 0/5
reception
- Install the GPRS antenna or
move the module
Reception LED no.5 on the
module flashing
Network search in
progress.
- If this stage is not passed,
install the GPRS antenna or
move the module
The remote controls do not
open the entrance
- Check programming
- Check that the operational
LED goes out as it should when
a remote control is used
- Check the wiring of the relay(s)
The remote controls open at
random.
HF range fault
- Install a standard 868 Mhz HF
antenna.