Installation and user guide for the EEN-BP2R car park control unit
Page 1 / 6
V233 – 0008 – AA
Installation guide
Installation guide
Installation guide
Installation guide for the
for the
for the
for the EEN
EEN
EEN
EEN-
-
-
-BP2R
BP2R
BP2R
BP2R Car park control unit
Car park control unit
Car park control unit
Car park control unit
RW
Presentation
The EEN-BP2R car park control unit enables RF
control of two car park accesses called "ENTRY"
and "EXIT".
It works with an active antenna supplied with the
EEN-KBP2R kit that receives an RF signal.
It accepts the 2 and 4-channel Intratone RF
868MHz remote controls.
When controlling the 2 accesses, the anti-passback
function is available and can be set by switches.
It can be installed on a DIN rail or wall-mounted.
Car park control unit features:
-
12
24 V AC/DC – 200 mA.
-
2 2A 24V relays.
Remote control management:
-
On the internet: www.intratone.com.
-
Read/write mode from the web
-
Max 2,500 remote controls
-
Opening of max 5 units per remote control.
Be sure to note the unit's
serial number. It will be
needed for managing your
remote controls from the
Internet.
Description of the unit's components
EC standards
The EEN-BP2R meets the R&TTE 1999/5/EC directive: electrical safety standard EN 60950 (2000)
applied, EMC standard EN 301 489-3 (2000) applied, radio standard EN 300 220-3 radio (2000) applied.
End of life product recycling:
The case and its accessories must not be disposed of with unsorted municipal waste, but must
follow the WEEE (Waste Electrical and Electronic Equipment) collection and recycling channel.
TOP
Red LED
8 switches
Reset button
Removable memory
Terminal
blocks
