8
FINISHING UP
SCREEN CALIBRATION
Before re-assembling the vehicle, you must cali-
brate the screen. To do this, simply turn the ve-
hicle on and allow the interface to start without
the SD card inserted. Press the factory “Menu”
button below the screen for 1 second to switch
into the interface source. It will change to a white
screen with a “crosshair” in the center. Use your
finger to give the crosshair a press. It will then
move to the upper left hand corner. Continue to
press this crosshair until you have completed all
four corners. Once finished, press the “OK” icon
that appears. At this point you can insert the Int-
raphex Navigation SD card into the interface and
press the navigation icon.
NAVIGATION SETUP
Once you have loaded the Intraphex Navigation
software, you will need to go through an initial
setup. The software is defaulted for the United
States, so you may simply hit next through the
entire process. All settings can be changed later
in the software’s settings menu.