12
PUSH THE TOUCH LAYER RIBBON CABLE
INTO THE CONNECTOR SECURING IT BY
PUSHING THE BLACK TAB IN. DOUBLE
CHECK THIS CONNECTION.
PLUG T-HARNESS INTO THE PCB. TWO
CONNECTIONS ARE REQUIRED TO THE
INTRAPHEX PCB. 15 PIN AND 5 PIN.
PLEASE BE SURE THAT THESE
CONNECTIONS ARE TIGHT AND SEATED
CORRECTLY. INCORRECT ASSEMBLY WILL
CAUSE TOUCH AND COLOR ISSUES.
PLUG T-HARNESS INTO FACTORY
CONNECTOR.
ON SOME MODELS THESE TWO
CAPACITORS MAY BE ORIENTED
DIFFERENTLY, THIS MAY CAUSE THE PCB
TO HAVE A SLIGHT BEND WHEN
MOUNTED. THIS IS OK.
