![background image](http://html1.mh-extra.com/html/intra-automation/digiflow-515/digiflow-515_installation-and-operating-manual_2081780031.webp)
Gas- and Steam Flowcomputer
DigiFlow 515
Operating Manual
31
10 Output circuits
10.1 Digital output
An output pulse can be taken from the terminal strip at the rear side to operate of external counters. At every
increase of a selectable decade of the sum counter a pulse count corresponding to this increase gets gener-
ated.
If the total value was chosen e.g. with a resolution of 0.01kg, an impuls so is distributed with every increase at
0.01kg.
This pulse is genarated at a transistor with open collector output. Pulse width is 10 - 90ms (selectable).
The maximum switch current is 100mA.
When connecting a counter to the pulse output, it may be necessary to use an external pull-up-restistor. A
restistance of 5 to 10k
Ω
connected to terminal 40, are most times sufficient.
Make sure that this output isn't usually suitable for a further flow indicator as input signal because of the not
periodical pulse signal, please
supply
29
30
external
DigiFlow 515
Fig. 11: Drive of external relay or counter
18V
40
29
30
41
external
resistor 10k
Ω
DigiFlow 515
Fig. 12: Drive of a logical input as e.g. PLC or electronic counter
Summary of Contents for digiflow 515
