Technical specifications
INTORQ | BA 14.0215 | 07/2019
15
Size
Screw hole circle
Fastening screws DIN 912 Minimum thread depth
Tightening torque
M
A
Diameter
Thread
without
flange
with flange
without
flange
with
flange
1)
without
flange
with
flange
1)
[mm]
[mm]
[mm]
[mm]
[mm]
[Nm]
[Nm]
25
282
M12
6 x M12x190 6 x M12x200
25
22.5
105
105
Tab. 2:
Rated data: screw kit for brake assembly onto flange
1)
Flange only permissible for max. 2 x 1000 Nm
CAUTION
¾
The screws for the different brake attachment variants have different strength grades
and may have special surface coatings. In order to guarantee a secure screw connec-
tion, use ONLY the proper screws from INTORQ!
¾
It is very important to comply with the minimum thread depth of the end shield (refer to
Rated data: screw kit for brake assembly onto flange, Page 15).
¾
If the required thread depth is not maintained, the fastening screws may run onto the
root. This has the effect that the required pre-load force is no longer established. The
brake is no longer securely fastened!
Size
Voltage
Power
Coil resistance
Current
Release
±10%
Hold
±10%
Brake release
Brake hold
U
L
U
H
P
N
P
H
R
N
±5%
I
L
[V DC]
[V DC]
[W]
[W]
[Ω]
[A]
25
160
80
2 x 236
2 x 59
2 x 108.5
2 x 1.48
205
103
2 x 178.1
2 x 1.15
2 x 425
2 x 106
2 x 98.9
2 x 2.07
Tab. 3:
Rated data for coil power
