Reset function
EN
When to use it? E.g. after an unsuccessful connection to the phone or when only one
earphone is playing. However, it can help in many other situations.
1. Delete “lntezze TRIQ+” from the list of paired devices on the phone. Ideally, turn
off the Bluetooth function on your phone as well.
2. Remove both charged earphones from the case. The LEDs on both earphones start
flashing white and you will hear “Pairing” from the earphones.
3. Quickly tap the multifunction button on both earphones five times. “Power OFF” is
heard and the earphones turn off. By holding down both multifunction buttons for
three seconds, the earphones will turn on again and “Power ON” will be heard.
The LEDs on the earphones will alternately flash red and blue.
4. Place the earphones next to each other so that you can see them. The LEDs on
both earphones start flashing white after about 8–10 seconds and you will hear
“Pairing” from the earphones. This completes the reset successfully and the
earphones can be paired with the phone again.
Warranty conditions - The warranty does not cover the
following situations:
1. Damage caused by unauthorised tampering with the device.
2. Filters clogged by earwax (may not be immediately visible) or otherwise needing
cleaning. Cleaning must be done by an authorised service and a fee is charged.
3. Earbuds with their duct filters removed.
4. Physical damage to the earbuds caused by a fall or impact.
5. Damage caused by force majeure.
