Intex SF20110 Owner'S Manual Download Page 3

(127)  MODEL SF20110 SAND FILTER PUMP  ENGLISH  7.5” X 10.3”  PANTONE 295U  06/26/2012

127

    

SAVE THESE INSTRUCTIONS

Page 3

English

SAFETY 

RULES

IMPORTANT SAFETY RULES

Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.

READ AND FOLLOW ALL INSTRUCTIONS

WARNING

 

To reduce the risk of injury, do not permit children to use this product. Always    

  supervise children and those with disabilities.

 

Children must stay away from this product and electrical cord(s).

 

Assembly and disassembly by adults only.

 

Risk of electric shock. Connect only to a grounding type receptacle, this product

  is provided with a ground-fault circuit interrupter. If replacement of the plug or cord  

  is needed, use only identical replacement parts.

 

Always unplug this product from the electrical outlet before removing, cleaning,  

  servicing or making any adjustment to the product.

• The unit is provided with a ground-fault circuit interrupter (GFCI). To test the GFCI,

  push the test button. T

he GFCI should interrupt power. 

Push the reset button,   

  power should be restored. If the GFCI fails to operate in this manner. 

T

he GFCI is 

  defective. If the GFCI interrupts power to the pump without the test button being  

  pushed, a ground current is flowing, indicating the possibility of an electric shock.  

  Do not use this pump. Disconnect the pump and have the problem corrected by a  

  qualified service representative before using.

 

Do not bury the electrical cord. Locate the cord where it will not be damaged by  

  lawn mowers, hedge trimmers and other equipment.

 

To reduce the risk of electric shock, replace damaged cord immediately. Use a  

  qualified electrician to replace the cord.

 

To reduce the risk of electric shock, do not use extension cords, timers, plug 

  adaptors or converter plugs to connect unit to electric supply; provide a properly  

  located outlet.

 

Do not attempt to plug in or unplug this product while standing in water or when  

  your hands are wet.

 

Do not use an appliance leakage current interrupter (ALCI) in place of a GFCI   

  since the ALCI will not protect people.

• Position this product away from pool, so as to prevent children from climbing on it  

  and access the pool.

 

Do not operate this product when pool is occupied.

 

To reduce the risk of entrapment hazard, never enter the pool if suction strainer 

  component is loose, broken, cracked, damaged or missing. Replace loose, broken, 

  damaged, cracked or missing suction strainer components immediately.

• Never play or swim near suction fittings. Your body or hair may be trapped causing  

  permanent injury or drowning.

• To prevent equipment damage and risk of injury, always turn pump off before    

  changing the filter control valve position.

• Never operate this product above the maximum working pressure stated on the 

  filter tank.

• Hazardous Pressure. Improper tank valve cover assembly could cause the valve  

  cover to blow off and cause serious injury, property damage or death.

• This product is intended to be used only for the purposes described in the manual!

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN 

PROPERTY DAMAGE, ELECTRIC SHOCK, ENTANGLEMENT OR 

OTHER SERIOUS INJURY OR DEATH.

This product is for use with storable pools only. Do not use with permanently-installed pools. 

A storable pool is constructed so that it is capable of being readily disassembled for storage 

and reassembled to its original integrity. A permanently-installed pool is constructed in or on 

the ground or in a building such that it cannot be readily disassembled for storage.

These product warnings, instructions and safety rules provided with the product represent 

some common risks of water recreation devices and do not cover all instances of risk and 

danger. Please use common sense and good judgement when enjoying any water activity.

CAUTION

Summary of Contents for SF20110




























Reviews: