166
IO
(166IO) AP622 ELECTRIC PUMP ENGLISH 4.875” X 7.25” 09/18/2017
INFLATION
When inflating large items such as inflatable boats and large air
mattresses, no accessory nozzle
(FIG. 6)
may be needed. The air
pumps inflation connector may fit directly into the inflation valve. If a
nozzle is needed, use the air pump nozzle most appropriately sized
for the product, then follow the instructions below:
Inflation using the 12 Volt DC power cord:
1. Plug the 12 Volt DC power cord into the air pump power receptacle
(FIG. 5)
.
2. Attach the DC power cord plug into a standard 12 Volt DC automobile
cigarette lighter or accessory outlet
(FIG. 5)
.
3. Attach the air pump inflation connector with nozzle if appropriate to the inflation valve on the item to be
inflated
(FIG. 7)
.
4. Depress "I" on the air pump switch to operate air pump
(FIG. 8)
. Inflate item to desired level.
5. When the item is inflated, depress "O" to turn air pump off inflate mode
(FIG. 3)
. Immediately unplug air
pump and cords when air pump is not in use.
FIG (6)
FIG (8)
Inflation using the air pump when fully charged (without power cord):
1. Attach the air pump inflation connector with nozzle if appropriate to the
inflation valve on the item to be inflated.
2. Depress "II" on the air pump switch to operate air pump
(FIG. 9)
. Inflate
item to desired level.
3. After the item is inflated, depress "O" on the air pump switch.
DEFLATION
Deflation using the 12 Volt DC power cord:
1. Follow steps 1 & 2 under DC power inflation instructions.
2. Attach the air pump deflation connector with nozzle if
appropriate to the deflation valve on the item to be
deflated
(FIG. 10)
.
3. Depress "I" on the air pump switch to operate air pump.
Deflate item to desired level.
4. When the item is deflated, depress "O" to turn air pump off
deflate mode. Immediately unplug air pump and remove the
cord when air pump is not in use.
Deflation using the air pump when fully charged (without power cord):
1. Attach the air pump deflation connector with nozzle if appropriate into the deflation valve on the item to be
deflated.
2. Depress "II" on the air pump switch to operate air pump. Deflate item to desired level.
3. After the item is deflated, depress "O" on the air pump switch.
FIG (9)
FIG (7)
FIG (10)
OR
SAVE THESE INSTRUCTIONS
Page 3
©2017
Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd. - Intex Recreation Corp. All rights reserved/Tous droits réservés/Todos los
derechos reservados/Alle Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas
utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/
Intex Marketing Ltd. to/à/a/an Intex
Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801
• Distributed in
the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/
Intex Trading B.V.,
Venneveld 9, 4705 RR Roosendaal – The Netherlands
www.intexcorp.com
�
