163
SAVE THESE INSTRUCTIONS
Page 16
(163) MODEL CS15110 SAND FILTER PUMP & FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U
09/18/2010
English
SAND FILTER PUMP HOSE CONNECTION SETUP (continued)
SS
EE
TT
UU
PP
II
NN
SS
TT
RR
UU
CC
TT
IIOO
NN
SS
For INTEX pool size 16' and below:
1. In a counter-clockwise motion unscrew plunger valve union from the threaded
strainer connector
(25)
. Be careful not to lose the step rubber washer
(22)
.
2. Grasp the plunger valve assembly. Make sure the step washer
(22)
is in place.
Connect adaptor B
(27)
to plunger valve union.
3. Remove wall plug and then insert the strainer
(28 & 30)
into the lower position
of protruding hose connection, and the nozzle
(28 & 29)
into the upper position
of protruding hose connection. Adaptor B
(27)
fits over the strainer
connection
(28)
inserted into the connection.
Tighten securely.
4. Remove the drain valve
(3)
from the 6-way valve outlet and connect the hose
to the outlet.
For NON-INTEX pool:
1.
Connect the hose
(12)
to the pool inlet/outlet connection with a large hose
clamp. Tighten securely.
Remove the drain valve
(3)
from the 6-way valve
outlet and connect the hose to the outlet.
POOL
LARGE HOSE
CLAMP
POOL
12
3
28 & 29
3
28 & 30
