background image

108 

GS

(108GS)  MODEL 636G FILTER PUMP  ENGLISH  7.5” X 10.3”  PANTONE 295U  06/22/2014

English

OWNER’S 

MANUAL

   IMPORTANT 

SAFETY RULES

Read, understand, and follow 

all instructions carefully before 

installing and using this product.

Don’t forget to try these other fine Intex products: pools, 

pool accessories, inflatable pools and in-home toys, airbeds 

and boats available at fine retailers or visit our website.

Due to a policy of continuous product improvement, Intex 

reserves the right to change specifications and appearance, 

which may result in updates to the instruction manual without 

notice.

For illustrative purposes only.

© 2014 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd.- Intex 

Recreation Corp.

All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte 

vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/

Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in 

Lizenz von/

Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex 

Recreation Corp., P.O. Box 1440, Long Beach, CA 90801

 • Distributed in the European Union by/Distribué dans l’Union Européenne 

par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/

Intex Trading B.V., Venneveld 9, 4705 RR 

Roosendaal – The Netherlands

www.intexcorp.com

Krystal Clear™

Model 636G Filter Pump

12 V~, 50 Hz, 15 A

Hmax 1.0 m, H min 0.19 m, IPX5

Max. Water Temperature 35 °C

108-*GS-R0-1506

Summary of Contents for Krystal Clear 636G
















Reviews: