(110GS) MODEL 634RC FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/17/2019
110
GS
SAVE THESE INSTRUCTIONS
English
Page 8
The installation instruction shall provide information on requirements specified for the electrical
installation and shall include reference to national wiring rules.
FILTER PUMP HOSE CONNECTION SETUP
1.
Remove the Krystal Clear™ filter pump and hoses from the packaging.
2.
Place the filter pump in such a manner, that you can easily assemble the hose
(8)
connections to the plunger valve. Ensure the filter pump is accessible at all time for service
and
maintenance.
Note: Some regional regulations may require the filter pump to be mounted on a
stationary platform. There are two mounting holes located in the pump base for this
reason. Consult your local authorities for filter-pump mounting requirements.
3.
Grasp the two pump hoses
(8)
and connect the hose nuts to the filter pump.
4.
In a counter-clockwise motion unscrew the threaded filter housing collar
(1)
from the filter
housing. Place it in a safe place.
5.
The Filter Pump is an airtight system. In a counter-clockwise motion turn both air release
valves
(2 & 7)
1 - 2 turns to open.
DO NOT remove air release valves as water will expel
with force if the motor is turned on and injury may occur.
6.
Grasp and remove the filter housing cover
(4)
. Check to see if a cartridge is inside the
housing. If yes, replace the cover, finger tighten the housing collar
(1)
back onto the filter
housing.
7.
Gently finger tighten the sediment release valve located at the bottom of the
housing to be
sure that water does not leak out.
8.
When the pool is filled connect the hose from the bottom of the filter housing to the highest
strainer assembly. You will find the hose connection at the bottom of the plunger valve
assembly. Use the hose nut to attach the hose.
9.
Connect the second hose which is fixed to the middle of the motor housing to the remaining
liner
connection.
It is essential to change any damaged element or set of elements as soon as possible.
Use only parts approved by the manufacturer.
WARNING
Position this product away from the pool, so as to prevent
children from climbing on it and accessing the pool.
WATER LEVEL
ADJUSTABLE POOL
INLET JET NOZZLE
PLUNGER VALVE
ASSEMBLY
HOSE NUT
OUTLET HOSE
INSIDE LINER
WALL
THREADED
STRAINER
CONNECTOR
FILTER HOUSING
COLLAR
FILTER CARTRIDGE
INSIDE
FILTER HOUSING
COVER
AIR RELEASE
VALVE
MOTOR
HOUSING
HOSE O-RING
POWER CORD
INLET HOSE
OUTSIDE
LINER WALL
(ILLUSTRATION NOT TO SCALE)
W
A
T
E
R
F
L
O
W
W
A
T
ER F
L
OW
HOSE O-RING
AIR JET VALVE
INLET THREADED AIR
CONNECTOR
