Intex KOM0541, User Manual

Page: 14 / 36

14
Owner’s manual
EN
Enable the UPS by turning on the power ON/OFF switch, which is situated on the front panel.
The UPS is now ready to use. Switch on your equipment and you are ready to function.
*Safety notice*
The product contains voltages, which are potentially hazardous. Qualified service personnel
should perform all repairs.
Do not try to open the cover and to service the system yourself, no user serviceable parts inside.
Refer servicing to qualified service personnel only. The product has its own internal energy source
(battery). The output receptacles may be live even when the product is not connected to an AC
supply.
*Warning*
In case of fire risky, please change the fuse with the same kind and same rate or reset the
breaker. The product is intended for indoor use only. Kindly note to avoid excessive heat, dust,
humidity or liquids.
BATTERY MAINTENANCE / BATTERY CHARGING
AFTER SHIPMENT FROM THE FACTORY THE BATTERY NEEDS RECHARGING. IF NOT
USED FOR A LONG PERIOD OF TIME, THE BATTERY WILL START SELF-DISCHARGING,
WHICH MAY RESULT IN A SHORT SERVICE LIFE OF THE BATTERY OR MAY EVEN CAUSE
DAMAGE TO IT DURING WARRANTY PERIOD. CARE SHOULD ALSO BE TAKEN TO AVOID
EXCESSIVE TEMPERATURE AROUND THE UPS, WHICH COULD ALSO RESULT IN REDUC-
ING SERVICE LIFE OF THE BATTERY. TO ACHIEVE MAXIMUM SERVICE LIFE FROM THE
BATTERY THE ABOVE INSTRUCTIONS SHOULD BE FOLLOWED.
The UPS battery charges whenever the UPS is connected to utility power & is switched ON. It
typically requires more than 12 hours to charge fully. Operating runtime is reduced until the battery
is fully charged.