36
Notes:
1. First close WIFI network, only one could be used,
otherwise there will be conflict.
2. This device will automatically detect USB Ethernet card
and switch on the “Ethernet”, there will be a network icon in
the status column at this time.
3. Hold on for moment, this device will try to connect to
Internet automatically, if the router, the DHCP service is
already open and the netgate, DNS and relevant setting have
been
made,
then
it
will
connect
to
Internet
automatically.(Ethernet card function must be selected already)
4. If this device fails to connect, usually the reason is
something is wrong with setting in router. You can set the
parameters in this device as follows:
a. Enter setting/Ethernet setting, select and open Ethernet.
Enter configuration information, choose “static IP setting,
enter static IP setting interface (default is automatic acquiring