(337PO) FLOATING POOL SPEAKER WITH LED LIGHT ENGLISH SIZE: 4.875” X 7.25” 07/29/2017
337
PO
SAVE THESE INSTRUCTIONS
Page 1
�
INTEX
®
OWNER'S MANUAL
FLOATING
POOL
SPEAKER
WITH LED LIGHT
Model F
LS
625
IPX7
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
• This product is not a toy, keep away from children.
• Do not dispose of batteries in regular trash, municipal waste stream or by fire
as battery may leak or explode.
• Do not stare directly at the light emitted by this product.
• This product is resistant to water, but it is not designed to be completely
submerged. Submersion could cause water to enter the product causing
damage to the electronics.
•
Do not sit, straddle, step or exert pressure on the product.
FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID PROPERTY
DAMAGE OR OTHER INJURY.
WARNING
337-*PO-R0-1807
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
