First use
10
Inflating the lounge
WARNING!
Risk of drowning!
If the inner tube and head cushion are not sufficiently
inflated, there is a risk of drowning.
− Make sure that the lounge is sufficiently inflated
before and during use. Check the air pressure
regularly, especially on hot or cold days.
NOTICE!
Risk of damage!
Improperly inflating the lounge may cause it to ex-
plode.
− Never use a high pressure compressor to inflate
the lounge.
− Only inflate the lounge with cold air.
− Do not over inflate the lounge. Do not exceed the
maximum air pressure of 0.44 psi (0.03 bar).
1. Look for a clean area where there are no rocks or other sharp-
edged or pointy objects.
2. Pull the valves
5
out of the outer ring
3
and the head section
1
.
3. Open the valve caps
6
.
4. Inflate the inner tube
3
and the head cushion
1
one after
another. Use a foot or hand pump to do so.
The lounge has been inflated when the outer ring and the head
section feel firm, but are not too hard.
5. Close the valves and push them into the lounge.