69PO
(69PO) 3 IN 1 VALVE ENGLISH 4.875” X 7.25” 04/26/2016
SAVE THESE INSTRUCTIONS
Page 1
69PO
SAVE THESE INSTRUCTIONS
Page 2
(69PO) 3 IN 1 VALVE ENGLISH 4.875” X 7.25” 04/26/2016
069-*PO-R0-1704
3 IN 1 VALVE INSTRUCTION
TO INFLATE
WITH QUICK-INFLATION VALVE
1. Ensure the quick-exhaust and
the optional inflation caps are
securely tightened.
2. Turn the quick-inflation cap fully
counterclockwise. See Fig 1-a.
3. Pull the quick-inflation cap to
open. See Fig 1-b.
4. Insert the inflation opening of
an air pump directly into the
quick-inflation valve. See Fig 2.
5. Inflate the product to approximately
80% of desired firmness.
CAUTION: To prevent bursting,
do not over inflate or use high
pressure air compressor.
a
b
Fig 1
Fig 2
Fig 4
Fig 5
Fig 6
6. Align the two “ “ on the cap
with the arrows on both side of
the quick-exhaust cap tabs and
push in firmly. See Fig 3-a.
7. Turn the quick-inflation cap fully
clockwise to close. See Fig 3-b.
TO INFLATE
WITH OPTIONAL INFLATION VALVE
8. Ensure the quick-exhaust and
the quick-inflation caps are
securely tightened.
9. Pull the optional inflation cap
tab to open. See Fig 4.
10. Insert the nozzle of an air pump
into the inflation valve. See Fig 5.
11. Inflate the product to
approximately 80% of desired
firmness.
CAUTION: To prevent bursting,
do not over inflate or use high
pressure air compressor.
12. Close the optional inflation cap
securely after inflation. See Fig 6.
TO ADJUST
13. If the product is too firm, open
the quick-inflation cap, repeat
steps #2 and #3.
14. Gently press one of the 3
protruding tabs on the
quick-inflation valve to release a
small amount of air.
CAUTION: Do not bend or
fold down the black rubber
diaphragm.
See Fig 7.
15. When the desired firmness is
achieved, replace the quick-
inflation cap back. See Fig 3.
Quick-inflation cap
Quick-exhaust cap
Optional inflation cap
Quick-inflation cap O-ring
Quick-exhaust cap O-ring
Rubber diaphragm
Fig 7
Fig 3
a
b
WARNING
•
Infants have suffocated on inflatable mattresses. Never place infant aged
birth to 15 months to sleep on this inflatable air mattress / air bed. Infants
can suffocate on an underinflated or deflated mattress, on bedding , by
co-sleeping with another person, and by entrapment between the mattress
and bed frame or between the mattress and a vertical surface.
•
Children can be entrapped between the inflatable mattress and an adjacent
vertical surface. Provide at least a shoulder width space between the
inflatable mattress/airbed and adjacent vertical surfaces such as walls,
dressers or other objects.
•
Always keep the inflatable mattress fully inflated when in use.
