Intex 102-1/2 x 63'' x 25-5/8'' Owner'S Manual Download Page 8

123

IO

SAVE THESE  INSTRUCTIONS

Page 8

(123IO)  SMALL RECTANGULAR METAL FRAME POOL  ENGLISH  7.5” X 10.5” PANTONE 295U  09/29/2006

SS

EE

TT

--UU

PP

  II

NN

SS

TT

RR

UU

CC

TT

IIOO

NN

SS

POOL SET UP (continued)

This pool may have been purchased with the Intex Krystal Clear™
filter-pump. The filter-pump has a separate set of installation instructions
and is to be set-up after assembling this unit.

1.

• Find a flat, level location that is free and clear of stones, branches or other sharp 

objects that may puncture the pool liner or cause injury.

• Open the carton containing the liner, joints, legs, etc., very carefully as this carton can 

be used to store the pool during the winter months.

• Remove the liner

(12)

from carton and spread it out over the ground cloth with the 

drain valve towards the draining area. Place the drain valve away from the house.
Spread it out completely with its edges being at least 5 - 6’ (1.5 - 2.0 m) from any 
obstacle such as walls, fences, trees, etc.
Open it up to warm it in the sun. This 
warming will make installation easier. Be 
sure to face the end with the 2 hose 
connectors towards the electrical power 
source.

IMPORTANT: Do not drag the pool liner 
across the ground as this may result in 
leaks or other damage (see drawing 1).

• During the set-up of this pool liner point the hose connections or openings in the 

direction of the electric power source. The outer edge of the assembled pool is to be 
within reach of the electrical connection for the optional filter-pump.

2.

Remove all the parts from the carton(s) and place them on the ground in the location 
where they are to be assembled. Check the parts listing and be sure all the pieces to be
assembled are accounted for (see drawings 2.1 & 2.2).

IMPORTANT: Do not start assembly if any pieces are missing. For replacement 
pieces call the Consumer Service telephone number in your area.

After all pieces are accounted for, move the pieces away from the liner for of installation.

1

ELECTRICAL SOURCE

LINER

5 - 6' 

(1.5 - 2.0 m)

5 - 6' 

(1.5 - 2.0 m)

5 - 6' 

(1.5 - 2.0 m)

2.2

(A)

(A)

(A)

(B)

(A)

(A)

(A)

(B)

(C)

(D)

(C)

(D)

177-1/4” X 86-5/8” X 33-1/2”

2.1

(A)

(A)

(B)

(A)

(A)

(C)

(D)

(C)

(D)

(B)

86-5/8” X 59” X 23-5/8”

102-1/2” X 63” X 25-5/8”
118” X 78-3/4” X 29-1/2”

Summary of Contents for 102-1/2 x 63'' x 25-5/8''
















Reviews: