IntesisHome
®
PA-AW-WIFI-1
6
INSTALLATION GUIDE
4.4 Placement
IntesisHome
®
device needs to be placed close to the Control Panel, when there is a Monobloc system and
next to the Indoor Unit, when there is a Bibloc system (see Figure 5).
Recommendations:
1. Use the top hole in the back of the IntesisHome
®
device to insert cables coming from the indoor
unit or the Control Panel (See Figure 1).
2. In order to place the device, use the holes in the back of the device to screw it. Double side tape
can also be used to fi x it. Please remember to leave enough space for the connected cables (See
Figure 1).
3. Fix the IntesisHome
®
device preferably as close as possible from the Wi-Fi signal source (Access
Point or router). If you have coverage problems after installation, please visit the connectivity
support section in our site at www.intesishome.com/support/connectivity
5. Technical information
In order to obtain a complete and technical description of the device, please see the document at http://
www.intesishome.com/docs/PA-AW-WIFI-1-Technical-Info-eng.pdf
6. FAQ and support
For any question or problem related with the product or the installation procedure, please visit our support
center at www.intesishome.com/support .
Important: Avoid placing
the device next to metal
surfaces.
Important: When possible, try to check Wi-Fi coverage
in the installation location. Good Wi-Fi level is strongly
recommended.
IMPORTANT:
KEEP THIS MANUAL AND THE PRODUCT
ID LABEL IN A SAFE PLACE
Figure 5.- IntesisHome
®
Device and Aquarea placement
Bibloc
example
Monobloc
example
