Interton S465-D, User Manual

Page: 6 / 25

10 11
Power-on Delay
Power-on delay allows you to insert the instrument in your ear without the hearing instru-
ment squealing. It delays the switch-on time by 10 seconds after closing the battery
compartment. A beep each second is presented during this time.
Stand-By Mode
Stand-by mode reduces battery consumption since only a small amount of power is
used. When in stand-by mode, the hearing instrument will not deliver sound to the ear.
To put the instrument into stand-by mode, hold down the Memory Selector for more
than one second. You will hear a series of beeps, indicating that the instrument is now
in stand-by mode.
To return to functional mode, simply press the Memory Selector once.
Volume control – BTE and PBTE
Your instrument has a fully automatic volume control. Therefore,
it should not be necessary to control the amplification (volume)
manually.
However, the volume control toggle provides you with the ability
to adjust the amplification to your liking.
Use your index finger to adjust the volume, pushing the toggle
horizontally or upwards to increase and downwards to decrease
the volume.
During the fitting of the instrument, your hearing care practitioner will have chosen an
optimal volume setting for you. When switching the instrument on, the volume will have
this optimal setting.
• To prevent unintended usage by paediatric or physically or mentally challenged users,
the volume control must, if enabled, be configured to only provide a decrease of the
sound generator output level.
• If you prefer not to use the volume toggle your hearing care practitioner can switch
the volume control off