Interton RD2CIC-HP, User Manual

Page: 17 / 31

33 32
The volume control is an optional feature in the TSG module used for adjusting the sound generator
output level.
Modulation level and speed can also be configured to your likes and needs. An additional feature can
be enabled by your hearing care professional that allows you to select predefined sounds that simulate
sounds from nature, such as breaking waves or running water.
If you have two wireless hearing aids that support ear-to-ear synchronization, this functionality can be
enabled by your hearing care professional. This will cause the Tinnitus Sound Generator to synchronize
the sound in both hearing aids.
If your tinnitus troubles you only in quiet environments, your doctor, audiologist or hearing care profes-
sional can set the TSG Module so that it becomes audible exclusively in such surroundings. The overall
sound level can be adjusted via a volume control. Your doctor, audiologist or hearing care professional
will review with you the need for having such a control.
For hearing aids where ear-to-ear synchronization is enabled your hearing care professional can also
enable environmental monitoring synchronization so that the TSG noise level is automatically adjusted
simultaneously in both hearing aids dependent on the background sound level. Additionally since the
hearing aid has a volume control then the background noise level monitored by the hearing aid and the
volume control can be used simultaneously to adjust the generated noise level in both hearing aids.
9.2.5 Using TSG with smartphone apps
The tinnitus sound generator control via hearing aid push buttons can be enhanced with wireless
control from a TSG control app on a smartphone or mobile device. This functionality is available in sup-
ported hearing aids when a hearing care professional has enabled the TSG functionality during fitting
of the hearing aid.
i
NOTE: To use smartphone apps, the hearing aid must be connected with the smartphone or
mobile device.
9.3 Technical specifications
9.3.1 Audio signal technology
Digital.
9.3.2 Available sounds
White noise signal which can be shaped with the following configurations:
The white noise signal can be modulated in amplitude with an attenuation depth of up to 14 dB.
High-pass filter Low-pass filter
500 Hz 2,000 Hz
750 Hz 3,000 Hz
1,000 Hz 4,000 Hz
1,500 Hz 5,000 Hz
2,000 Hz 6,000 Hz