Doc 0191600 rev G
Page 15 of 20
Not subject to issue control when printed
Removing PCB Assembly
Using a screwdriver, slowly lift off the switch cover to detach from PCB frame assem-
bly. Remove cover
Locate the two screws on the PCB and
unscrew both screws to release the PCB
assembly from the PCB frame assembly
2 screws
Using a screwdriver, remove
the mic assembly from PCB
frame assembly
VC
Slowly, lift the PCB from the frame
by starting on the bottom side of
the PCB
After lifting the bottom part of the
PCB, slowly pull it away from the
frame until the VC clears off from
the plastic frame
