7
Downrod Pin
Downrod Clip
Yoke
Downrod
Set Screw
Tab
Slot
Downrod
6. Lift the downrod into the mounting bracket. Rotate
the downrod until the tab in the mounting bracket is
seated in the slot in the downrod ball.
WARNING:
The fan and/or downrod should
not rotate in the mounting bracket, if installed
correctly. Failure to align the slot in the downrod ball
with the tab on the mounting bracket may result in fan
falling causing serious injury or death.
5. Insert the downrod into the yoke and reinstall the
downrod pin and downrod clip. Then retighten the two
set screws.
Note:
With wiring extending out of the downrod,
measure 8 inches of lead wire and cut the excess wire with
wire cutters (not included). Then strip 1/2” of insulation
from the end of each wire.
WARNING:
Do not cut braided cable.
6
5
ASSEMBLY INSTRUCTIONS
Mounting
Bracket
