www.intertec.info
Operating Instructions Motor ExVENT 30xx
Page 4 / 7
COM141824651Ien-2
INTERTEC-Hess GmbH · Raffineriestr. 8 · 93333 Neustadt/Donau · Germany ·
+49 9445 9532-0 · [email protected]
ExVENT 30xx .. ..
without fan blade
INFO
You will find the precise technical data for your in-
strument on the label.
Type
Rated voltage/Operating voltage
Rated output
Ø Blade
Illustration 1:
Label Motor ExVENT
5
Installation
NOTICE
Risk of Damage
When removing from the packaging and during trans-
port, the connection line must not be stressed or bent.
Any installation location can be chosen. The installation
must be carried out on the bearing bracket. 2 mm thick
spacers must be placed beneath the mounting flanges to
prevent abrasion of the auxiliary fan.
The operating temperatures must be adhered to, other-
wise the thermal fuse will be triggered.
The connection line must be permanently installed up to
the inlet in the on-site junction box, taking the permiss-
ible bending radius = 5 x outer diameter into considera-
tion.
The connection line must be connected in a housing that
complies with the requirements of a recognized type of
protection in accordance with EN 60079-0 section 1 if
the connection is made in a potentially explosive atmo-
sphere.
The nameplate must always remain easily legible.
Bracket
Illustration 2:
ExVent 30xx 2D front view
Air direction
Illustration 3:
ExVent 2D side view
