Installation manual
FCC ID: OSZ39000M1
Page 9 of 10
2.6 Europe - EU Declaration of Conformity
This device complies with the essential requirements and other relevant provisions of the European
R&TTE Directive 1999/5/EC.
Compliance to essential test suites is met per standards:
R&TTE Harmonized Standard
Description
LVD specification
EN 60950
EN 60950,ed. (1992), incl A1(1993), A2(1993), A3(1995) and
A4(1997)
Safety of information technology equipment, including electrical
business equipment.
Meets R&TTE directive art. 3.1.a of essential requirements on
protection of the health and sefety of the user.
ETSI EMC specification
ETSI EN 301 489-1 V1.2.1
(2000-08)
ETSI EN 301 489-17 V1.1.1
(2000-09)
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment
and services;
Part 1: Common technical requirements
Part 17: Specific conditions for Wideband data and HIPERLAN
equipment
Meets R&TTE directive art. 3.1.b of essential requirements on
protection with respect to Electro Magnetic Compatibility.
ETSI RF specification
ETSI EN 300 328
Part 1 V1.2.2 (2000-07)
ETSI EN 300 328
Part 2 V1.1.1 (2000-07)
EN 301 893
V1.1.1 (2001-01)
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Wideband Transmission systems; data transmission equipment
operating in the 2,4 GHz ISM band and using spread spectrum
modulation techniques;
Part 1: Technical characteristics and test conditions
Part 2: Harmonized EN covering essential requirements
under article 3.2 of the R&TTE Directive
Broadband Radio Access Networks (BRAN), HIPERLAN Type 2
Harmonised EN covering essential requirements of article 3.2 of the R&TTE
Directive
Meets R&TTE directive art. 3.2.a on effective use of spectrum so as to
avoid harmful interference.
Important Notice :
This device is a dual band 2.4 GHz / 5 GHz low power RF device
intended for home and office use in EU and EFTA member
states. In some EU / EFTA member states some restrictions may
apply. Please contact local spectrum management authorithies
for further details before putting this device into operation.
EU versions of this WLAN device may only have 4 channels in 5150-5250MHz band with RF output power
limited to 50 mW. This device is intended for indoor use only.
