MultiMax
Assembly Instructions
Thank you for buying a Calf-Tel MultiMax Hutch. We recommend that you:
First assemble the timber base
Then assemble the MultiMax hutch
Finally attach the hutch to the base.
If possible, we suggest you leave the panels for a
day or two after delivery to regain their natural
shape before assembling them.
1. Equipment
You will need:
Drill with 5.5 mm and 8mm bit
5/16 socket and spanner, 11mm and 17mm sockets
Cross head screwdriver
A helper
2. Assemble the timber base
a) To assemble the base you will need:
The bag of timber base fixings
Two pieces of side timber (A)
Two pieces of front / back timber (B)
A
B
b) Lay the timber components out on a flat area with skids on the side pieces
uppermost as shown in the diagram below.
c) Mark out and pre-drill one 8mm hole per corner as indicated by the arrows.
d) Slide one washer onto each bolt & insert one bolt per corner into pre-drilled
holes.
e) Position L brackets against front & sides as indicated in the diagram.
f) Attach L brackets to timber with screws provided.
g) Lift & flip assembled base such that skids are underneath and adjacent to the
ground.
The timbers abut at corners as
shown; upper surfaces of base to be
flush ready for hutch to be lowered
on.
(if using power tools do
not over-tension)